| Deep Draw Press :: |
 |
| “JMK” Press Nos. |
4 |
4 ½ |
5 |
5 ½ |
6 |
6 ½ |
| Diameter of Crankshaft |
5 |
6 |
6 ¾ |
7 ½ |
8 |
9 ½ |
| Stroke, Punch |
12 |
15 |
18 |
20 ½ |
22 |
25 |
| Bed to Pressure plate Adjustment up, Stroke up |
13 |
16 |
20 |
24 ½ |
26 |
28 |
| Bed to Punch holder Adjustment up, Stroke up |
20 |
24 |
27 |
31 ½ |
32 ½ |
38 |
| Adjustment of Pressure Plate |
1 ½ |
2 |
2 |
2 |
2 ½ |
3 |
| Adjustment to Punch Holder |
5 ½ |
6 |
7 |
7 ½ |
8 |
11 |
| Width of Bed |
23 |
27 |
30 |
34 |
40 |
42 |
| Bed front to Back |
25 |
37 |
32 |
36 |
42 |
46 |
| Largest blank admitted |
20 |
24 |
27 |
30 |
34 |
40 |
| Largest Punch admitted |
12 |
15 |
18 |
20 ½ |
22 |
24 |
| Deepest draw |
6 |
7 ½ |
9 |
10 ¼ |
11 |
12 |
| Stroke per minute usual |
14 |
12 |
10 |
8 |
7 |
6 |
| Type of Clutch |
Friction |
Friction |
Friction |
Friction |
Friction |
Friction |
| Floor to bed |
20 |
24 |
34 |
21 ½ |
32 ½ |
34 |
| Overall height |
100 |
110 |
142 |
151 |
176 |
180 |
| Weight in Tons |
4 ½ |
6 |
9 |
14 ½ |
16 |
18 |
| Motor H.P.Required |
10 |
15 |
20 |
25 |
30 |
40 |
| R.P.M. of Motor |
960 |
960 |
960 |
960 |
960 |
960 |
|
| |
Spinning Rolling Machine |
| Features :: |
| Description |
JMK Heavy Duty
Rolling |
JMK Rolling |
JMK
Cutting |
JMK
Baby Cutting |
Length of Bed |
1828mm |
1600mm |
1295mm |
990mm |
Height of Centre |
381mm |
330mm |
280mm |
228mm |
Diameter of Spindle |
98mm |
78mm |
68mm |
63mm |
Width of Bed |
305mm |
280mm |
255mm |
210mm |
|
|
 |
|
Induction Heating Machine |
| Features :: |
 Fully Static, Solid State, Using IGBTs. |
| Advanced Control Circuit for enhanced Performance |
| Fully Auto & Manually Mode |
| Highest Efficiency |
| Improved Power Factor |
| Compact Size |
| |
| Advantages :: |
| Lesser Annealing Cost ( Approx 40% Less) |
| Homogeneous Heat Distribution |
| Uniform Annealing with better Quality & Products |
| Faster Heating Cycle |
| Higher Productivity |
| No License Required |
| Pollution Free Operation |
  |
 |
|
Induction Brazing Machine |
| Solid state highly reliable IGBT based medium frequency induction brazing system is the new edge of induction brazing technology for sandwich bottom brazing in the cookware industry. The medium frequency induction heats S.S. as well as aluminium so that aluminium melts and flow evenly on the surface & the joints are brazed. The dedicated designed coil will generate even heat on the surface so that brazing & flowing of molten aluminium is even. |
  |
| Features :: |
| POWER : 60 KW / 125 KW |
| UTENSIL BOTTOM : 100 mm to 650 mm |
| There are 3 independent heating head with 3 hydraulic system for maximum production. |
| PLC Base fully automatic. |
| Automatic selector selects one coil at a time connected to power source |
| Slide movement on highly smooth imported L.M. guides |
| Dedicated inductor design to have homogenous heat distribution |
| Single operator controlled, fully automatic machine. |
